A retractable banner stand is the easiest trade show graphic to buy and one of the easiest to get wrong. The printed panel rolls into a cassette in the base, a telescoping pole holds it up, and the whole thing travels in a shoulder bag. None of that tells you which width to order, which material to print on, or where the stand is allowed to stand once you are on the show floor.
This guide covers the decisions a printer needs from you before anything is made: panel size, material, placement under booth height rules, and the file specs that get artwork through on the first pass. Color Reflections sells the hardware and the printed panel together as retractable banners, and a stand is also bundled into their trade show packages.
Key takeaways
- Color Reflections lists three retractable panel sizes: 23.5, 33.5 and 47 inches wide, all 80 inches tall.
- Both vinyl and polyester are offered. Vinyl gives the more opaque, flatter face. Fabric absorbs light and cuts glare.
- An 80-inch panel stands 6 feet 8 inches tall, so in a 10 by 10 linear booth it belongs in the rear half, where 8 feet is allowed.
- The front half of that booth, forward to the aisle, is held to 4 feet. A retractable stand cannot go there.
- Artwork: images at 100 to 150 dpi at final size, CMYK where possible, all fonts and images included, logos as vector.
- Ask for the prep template for your exact hardware before you design. The bleed and the hidden area change from stand to stand.
What you are buying: a cassette, a pole, and a printed panel
Three parts, with three different lifespans. The base holds the spring-loaded cassette and the weight that keeps the stand upright. The pole clips into the back of the base and takes the load at the top rail. The printed panel is the part that goes out of date, gets creased, or gets a new product name on it.
That split is worth asking about at order time. If the panel can be replaced on the base you already own, a reprint is a graphic, not a graphic plus hardware. If it cannot, a new message means a new stand. Ask which one you are buying before you commit to a model for the whole sales team.
It also matters that the top rail and the cassette cover part of the panel. The printed sheet is taller than the area people see. That hidden strip is what the hardware grips, and its depth is set by the stand, not by you, which is why every prep template starts with a safe area rather than a flat panel size.
The three panel sizes, and how to pick a width
Color Reflections lists three retractable sizes: 23.5 by 80 inches, 33.5 by 80 inches, and 47 by 80 inches. Height is fixed at 80 inches across all three, so the only real decision is width.
23.5 inches is the narrow one. It fits beside a six-foot table, at the end of a counter, next to a door, or in a lobby where every square foot is leased. One line of copy and a logo is all it carries at a readable size.
33.5 inches is the one most exhibitors end up with. It holds a headline, one image and a short list, and it reads from across an aisle without crowding a 10 by 10 booth.
47 inches works as a small back wall on its own, or as a pair flanking a table. At that width the panel is heavy enough that you want to check the base weight and the bag before you fly with it.
One thing no size chart tells you: the bottom foot of an 80-inch panel is behind tables, chairs and people for most of a show. Put the company name and the single claim you want remembered in the top half of the panel, and treat the bottom as a place for texture rather than text.
Vinyl or polyester
Both are offered on the same three sizes, and the choice is about light more than durability.
Vinyl is the heavier, more opaque face. It hangs flat out of the cassette and holds dense, photographic color well. It is also shinier, so a hard spotlight or a glass wall behind the aisle will bounce off it. A vinyl panel that has been rolled tight for a year needs a few minutes to settle flat on the first setup.
Polyester is the fabric option. Color Reflections describes fabric on its indoor and outdoor banners page as absorbing light and reducing glare, which is the practical reason to pick it: a lit convention hall, a hotel ballroom with downlights, or a bright lobby. Fabric is lighter to ship, and it tolerates being rolled over and over. What it does not tolerate is being folded, because a crease across a fabric panel shows under raking light.
A simple rule: if the room is lit for photography or full of glass, print fabric. If the graphic is a dark, image-heavy design that has to look saturated, print vinyl.
Where the stand is allowed to stand
This is the part that gets missed until the floor manager walks the aisle. Most North American shows write their display rules from the IAEE Guidelines for Display Rules & Regulations, and for a linear booth, the one most 10 by 10 exhibitors occupy, the guidelines set a maximum display height of 8 feet, allowed only in the rear half of the booth. Everything in the remaining space, forward to the aisle, is limited to 4 feet.
An 80-inch panel is 6 feet 8 inches tall. That clears the 8-foot ceiling at the back and fails the 4-foot limit at the front by nearly three feet. So a retractable stand lives in the back half of a linear booth, flanking the back wall or beside a table pushed rearward, never at the aisle line.
Booth height limits
Where an 80-inch panel can stand
Maximum display height in a 10 by 10 foot linear trade show booth, next to the height of a retractable banner panel.
Front half of a linear booth
48 in
Retractable banner panel
80 in
Rear half of a linear booth
96 in
Sources: IAEE Guidelines for Display Rules & Regulations, linear booth height limits; Color Reflections retractable banner panel sizes.
Two qualifications. When three or more linear booths are used together as one space, the guidelines apply the 4-foot limit only to the portion within 10 feet of an adjoining booth, which gives a 30-foot run more usable height than a single 10 by 10. And the show organizer’s own exhibitor manual governs: read it before you order, because individual shows tighten these numbers.
Outside a show hall the constraint changes. In a lobby, a hospital corridor or a school entrance, nobody is protecting a neighbor’s sight lines. What facilities will protect is the exit route, and anything parked in it gets moved. Pick the spot with the building manager, not with the marketing calendar.
Artwork: what gets a file through on the first pass
Color Reflections publishes its file requirements, and they are specific enough to design against:
- Images at 100 to 150 dpi at final size. Do not scale a small image up to hit that number; a resampled file prints exactly as soft as it started.
- CMYK where possible. If the file is already RGB, leave it alone and say so rather than converting it yourself.
- Send everything: the layout file plus every font and every linked image.
- Illustrator, InDesign, Photoshop and Quark files are all accepted.
Their guide to working with your graphics provider whitepaper adds the reason Illustrator is recommended for work at this scale: vector type and vector logos scale to any panel width without softening, and free or plug-in design tools usually cannot edit vector art even when they can export it.
Bleed and hidden area come from the hardware, not from a house rule. The prep sheet for the AdStand double-sided stand in their printing forms library shows the pattern: half an inch of bleed on the top, left and bottom edges, a full inch on the edge that folds inside the panel, and a horizontal fold line across the middle of the sheet that you are asked to keep text and faces away from. A different stand has a different template. Ask for the one that matches your model before you start laying out.
The same sheet is blunt about type: convert fonts to outlines, supply logos as vector rather than as a JPEG of a logo, build layouts at 100 percent size, and embed images instead of linking them. Doing that at the start is the difference between a proof the same day and a file that comes back for rework.
When the file is ready, send it through the large file upload page rather than email, which will not carry a print-ready layout file.
Setup, travel, and the second show
Set the stand up once in the office before the show. You will find the bent pole, the missing foot or the panel that was trimmed a half inch short while there is still time to fix it, rather than at 7 a.m. on move-in day.
Store the panel rolled inside its own cassette, in the bag, standing or lying flat. Do not fold a fabric panel into a smaller box because it fits, and do not stack cases on top of a bag with a vinyl panel in it for a month.
Keep the print-ready file, named with the stand model and the panel size, in the same place as the hardware. Most reprints are late because nobody can find the file that made the original, not because the printer was slow.
When a retractable stand is the wrong tool
A retractable banner is a supporting graphic. It is the wrong answer in four common cases:
- You need a back wall. A tension fabric display or an SEG fabric graphic covers the full 8 by 10 foot wall in one graphic, and the frame packs down for travel.
- You need a photo backdrop. Press and sponsor walls are a step and repeat banner job, sized so logos repeat behind whoever is standing in front of them.
- You need to be lit from behind. That is a backlit SEG light box, not a panel on a pole.
- You are outdoors. A cassette base is not ballast. Outdoor runs belong on mesh, which lets wind pass through, or on pole banners built for wind loads.
If the stand is one piece of a larger booth, work out the whole kit first. The guide to trade show displays covers how back walls, tables, floor graphics and banner stands divide the work, and the trade show displays and graphics service page shows what Color Reflections builds for a full booth.
What to send when you are ready to order
Four lines of information get you a quote without a back-and-forth: the panel size you want, vinyl or polyester, single or double sided, and the date the stand has to be in the booth. Add the show name if there is one, so the booth rules can be checked against the panel height.
Color Reflections produces this work from Hollywood, Florida, Atlanta, Georgia and Philadelphia, Pennsylvania; the locations page has the address and contact for each. If the artwork is not settled yet, book a project consultation and bring the booth plan instead of a file.
When the panel size and the material are decided, order them on the retractable banners page.
Common questions
How tall is a retractable banner stand?
The three sizes Color Reflections lists are all 80 inches tall, which is 6 feet 8 inches standing. Only the width changes: 23.5, 33.5 or 47 inches.
Can a retractable banner go at the front of a trade show booth?
Not in a linear booth. Display materials forward of the rear half are limited to 4 feet under the IAEE display guidelines, and an 80-inch panel is well over that. Keep it in the back half and check the show’s own manual.
Is vinyl or fabric better for a banner stand?
Fabric for lit halls, glass lobbies and anywhere glare is a problem. Vinyl for dark, photographic graphics that need to look saturated and for a face that hangs dead flat.
What resolution should the artwork be?
100 to 150 dpi at final size, with logos and type kept as vector. Do not upscale a small image to reach it.
Can I reprint just the graphic and keep the stand?
On some hardware, yes. It depends on the model, so ask before you buy a stand you expect to re-skin every season.
The post Retractable Banner Stands: What to Spec Before You Order appeared first on Large Format Printing & Event Graphics.
